Recalls

Recall 43938

  • USA Recall: Vehicle description: trucks and buses.system: steering; shaft coupling.consequeces of defect: the coupling may slip on the sha
    The intermediate shaft coupling on the involved vehicles may have been machined oversized in the serration area where it attaches to the steering column. this would prevent the coupling from properly tightening on the shaft when the clamp and pinch bolt were installed.

    Corrective Action:
    Dealer will replace the shaft coupling, if necessary, without charge to owner.

    Additional Notes:
    Vehicle description: trucks and buses.system: steering; shaft coupling.consequeces of defect: the coupling may slip on the shaft when the steeringwheel is turned. under continued operation, the pinch bolt may bypass the notchin the steering shaft under high steering effort. loss of steering control andan accident may result.note: a raspy noise, accompanied by increased free play in the steering wheel,may indicate the defect.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.