Recalls

Recall 50028

  • USA Recall: The bolt could break, causing the engine to stall and not restart, increasing the risk of a crash.
    On certain medium duty trucks, the cylinder head idler gear shaft bolt may have been insufficiently tightened during initial assembly. continued operation in this condition could cause the bolt to loosen, resulting in abnormal noise from improper gear alignment.

    Corrective Action:
    Dealers will check the idler shaft bolt. if the bolt cannot be removed by hand, a modified idler shaft bolt will be installed. if the bolt is loose enough to be removed by hand, a new idler gear, idler shaft, and a modified idler shaft bolt will be installed. the recall began on december 20, 2005. owners may contact mitsubishi fuso at 1-856-467-4500.

    Additional Notes:
    Mitsubishi fuso recall no. r3150410.customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.