Recalls

Recall 66064

  • USA Recall: Vehicle description: passenger vehicles equipped with a split-back seatassembly.system: interior; seat belt inertia lock.conse
    The manual lock release lever on the split-back bench assemblies may have been bent during assembly. this bent condition could prevent the inertia seat lock assembly from functioning automatically. as a result, the front seat back may not lock in the upright position if the car is moving forward and brought to an abrupt stop.

    Corrective Action:
    The dealer will reposition the manual release lever if found necessary, in order to eliminate any interference on the inertia lock pendulum.

    Additional Notes:
    Vehicle description: passenger vehicles equipped with a split-back seatassembly.system: interior; seat belt inertia lock.consequences of defect: a tilted front seat back in the case of a sudden stopcould cause serious personal injury to seat occupant.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.