Recalls

Recall 69412

  • USA Recall: An over-torque of the spindle nut may cause the bearing to seize, possibly resulting in the overheating of the wheel end. as a result, a wheel end fire may occur.
    Kenworth is recalling certain model year 2010 t270 and t370 trucks equipped with non-lms hubs. the spindle nut attaching the hub and bearing to the axle spindle (steer or drive) may have been over-torqued during the hub installation process.

    Corrective Action:
    Dealers will replace the bearings free of charge. the spindle and hub will be inspected for scoring and replaced if necessary. the safety recall began on april 23, 2010. owners may contact kenworth at 425-828-5440.

    Additional Notes:
    Paccar recall no. 10kwa.owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.safercar.gov .

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.