Recalls

Recall 87845

  • USA Recall: Improper seating of the wheel can result in excessive vibration, brake rotor noise, difficulty removing the wheel after installation and operation of the vehicle, and possibly wheel-end separation during vehicle operation. should wheel-end separation occur, the driver could loose control of the vehicle, possibly resulting in a crash.
    Skf is recalling 2,805 hub units, part no. br930361, sold as a service part for 1997-2004 dodge dakota vehicles and 1999-2003 dodge durango vehicles equipped with 2-wheel drive & rear axle abs. due to a specification error, the rotor pilot for the hub unit may be too long. this results in the wheel to not be seated fully against the hub flange face during mounting.

    Corrective Action:
    Skf will notify owners and replace the defective hub units free of charge. the recall began on november 5, 2008. owners may contact skf vsm north america customer service at 1-800-644-8999.

    Additional Notes:
    Skf's recall no. skf pro 08-029us/ca.this recall only pertains to aftermarket skf hub units and has no relation to any original equipment installed on dodge dakota or durango vehicles manufactured by chrysler.customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.safercar.gov.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.