Recalls

Recall 9209

  • USA Recall: If the joint separated or the ball stud brake while the vehicle was moving, steering control would be lost.
    Vehicle description: chassis cabs. the tapered hole in the drag link end that attaches to the pitman arm tapered ball stud may be machined too deep causing the hole to be oversized. a drag link with an oversized hole may not "seat" the pitman arm tapered ball when assembled. this could cause higher than normal friction between components during operation, and possibly result in joint separation or a broken ball stud.

    Corrective Action:
    Dealers will inspect the steering linkage assembly and, if necessary, replace the drag link and the pitman arm.

    Additional Notes:
    Gm recall no. 00008.owner notification began march 27, 2000. owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact chevrolet at 1-800-222-1020 or gmc at 1-800-462-8782.also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  • © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.