Recalls

Recall 94425

  • USA Recall: Separation of the pump's driveshaft from the rotor could lead to a sudden loss of oil pressure causing the possibility of complete engine failure, resulting in an engine stall-like condition, increasing the risk of a vehicle crash.
    Bmw is recalling certain model year 2013 m5, m6 coupe, and m6 convertible vehicles, manufactured from july 19, 2012, through september 11, 2012. due to a manufacturing process error, the tolerance between the engine oil pump's drive shaft and the pump's rotor was not within specification. as a result, the pump's driveshaft could separate from the rotor.

    Corrective Action:
    Bmw will notify owners, and dealers will replace the oil pump, free of charge. the safety recall began on november 30, 2012. owners may contact bmw at 1-800-525-7417.

    Additional Notes:
    Owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.safercar.gov.

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.