Recalls

Recall R/2001/132

  • UK Recall: Front suspension ball joint circlip
    >Under conditions of excessively rough use such as driving over kerbs etc the front suspension ball joint taper pin may become loose in the suspension upright. if this occurs the secondary retaining circlip may be ineffective in preventing the complete detachment of the suspension upright from the track control arm.

    Corrective Action:
    Replace the existing circlip with an improved design part.

    68436 Affected Units 🚙🚙🚙🚙🚙🚙🚙🚙
    From VIN YB YR YA YG YC YK YD YE YL YY YS YT 1J 1U 1M 1P 1B 1R 1A & 1G to

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.