Recalls

Recall R/2006/119

  • UK Recall: Rear shock absorber mounting may fail
    >It has been identified that the lower rubber mounting on the metal bush of the rear shock absorbers may fail to meet the quality requirement. dependant on the mileage and operating conditions the rubber mounting may come completely free from the shock absorber. if this occurs the bodywork would no longer be supported above the wheels causing it to come into contact with the wheel concerned. should this occur the possibility exists that a critical driving condition might occur or even the risk of an accident.

    Corrective Action:
    Recalled vehicles will have the rear shock absorbers checked and replaced if necessary.

    3743 Affected Units 🚙🚙🚙🚙
    From VIN to

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.