Recalls

Recall R/2009/004

  • UK Recall: Possible reduction of braking effort
    >It has been identified that during production the front brake back plate retaining bolts may not have been tightened to the correct torque. should the vehicle continue to be used in this condition the bolts may work loose and fail. in the worst case this could result in the front brake assembly detaching from the axle breaking the air line causing a loss of braking effort at the affected wheel station and an increase in stopping distance.

    Corrective Action:
    Recalled vehicles will have the subject bolts checked for correct torque. if found not to be at the correct torque the bolts will be checked and replaced as necessary.

    520 Affected Units 🚙🚙🚙
    From VIN to

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.