Recalls

Recall R/2011/030

  • UK Recall: Shift lever may not engage
    >There is a possibility that the shift cable may have been installed incorrectly causing tension on the cable not anticipated in the design. if present this condition could cause the cable to detach from the shiftier assembly's dowel pin preventing the transmission from being shifted. the shift lever can then be moved into the park (p) position while the transmission is still in the last used gear before detachment. if the driver leaves the vehicle without engaging the parking brake there is a possibility the vehicle can roll creating the risk of a crash.

    Corrective Action:
    Vehicles affected will have the cable inspected to ensure it is fitted correctly if incorrect the cable will be refitted with a new mounting bush.

    87 Affected Units 🚙
    From VIN to

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.