Recalls

Recall R/2012/085

  • UK Recall: Rear suspension arm may separate
    >If the rear suspension arm is adjusted as part of a wheel alignment or other repairs whilst in service it is possible that backlash can occur. this can allow corrosion to develop and cause the threads to deteriorate. ultimately this could result in failure of the arm with a resultant loss of control of the vehicle.

    Corrective Action:
    Recall all affected vehicles to check the torque on the arm. where necessary the arm will be replaced.

    65863 Affected Units 🚙🚙🚙🚙🚙🚙🚙🚙
    From VIN JTM#f3#V##5002006 to JTM#F4#V##D019904

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.