Recalls

Recall R/2012/111

  • UK Recall: Rear-axle suspension level sensor may break
    >On e class vehicles without airmatic blocking of the level sensor linkage may occur. in extreme cases this may lead to breakage of the level sensor linkage. the linkage is used to measure the vehicle level via a sensor. if the linkage breaks it is possible the level sensor constantly records a vehicle level that is too low. this leads to a contact pressure rise in both air spring bellows and to hardening of the rear-axle suspension causing a noticeable loss in comfort.

    Corrective Action:
    Replace the level sensor linkage on these vehicles as a precautionary measure.

    6650 Affected Units 🚙🚙🚙🚙🚙
    From VIN WDB2112081B021731 to WDB2112921B208600

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.