Recalls

Recall R/2013/019

  • UK Recall: Airbag may release high temperature gases
    >In the event that the driver airbag is deployed during a frontal impact small holes may occur on the surface of the airbag. the holes are caused by high temperature gases from the airbag inflator exhausting directly onto the surface of the airbag material. the high temperature gas/airbag material may contact the drivers skin. the deployment performance of the driver airbag is not affected.

    Corrective Action:
    To replace the driver airbag with new.

    2498 Affected Units 🚙🚙🚙🚙
    From VIN to

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.