Recalls

Recall R/2013/045

  • UK Recall: Braking may be reduced
    >It is possible that moisture can enter the front wheel abs sensors via its wiring due to insufficient waterproofing. this can cause the generation of an abnormal signal to the abs ecu. this will normally be identified to the driver by the illumination of a warning light on the dash panel the fluctuation of the speedometer needle or noise produced by the false activation of the abs system. in extreme cases it could affect the directional control of the vehicle or reduce the braking efficiency of the vehicle.

    Corrective Action:
    Recall all affected vehicle to replace the sensors.

    1534 Affected Units 🚙🚙🚙🚙
    From VIN MMCXNA03ADH000211 to MMCXNA03ADH002667

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.