Recalls

Recall R/2015/098

  • UK Recall: Short circuit may occur
    >It is possible that during the manufacturing process the coating on the occupant restraint control (orc) printed circuit may not have been applied correctly. if the coating has been applied incorrectly it can result in lead salts forming which can cause a resistive short across the orc module printed circuit board(s). atmospheric humidity may increase the potential for this condition to occur. should this occur then it will cause the airbag warning lamp to illuminate and potentially disable the passive restraint system. ultimately this can result in an inoperative passive restraint system (airbag) which could increase the risk of injury in the event of a collision.

    Corrective Action:
    Recall all affected vehicles to replace the orc module.

    1069 Affected Units 🚙🚙🚙🚙
    From VIN 1C4RJEAG0EC106967 to 1C4RJFKTXEC402001

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.