Recalls

Recall R/2017/193

  • UK Recall: Brake switch may be activated permanently
    >The ball head connecting the brake pedal and the master brake cylinder the ball head might not be locked properly into the ball cage. if the driver accidentally pulls up the brake pedal the brake switch would be activated permanently. this will cause: the brake lamps to be illuminated even while driving a check control message would not alert the driver. an engine start or gear selection would be possible without brake actuation. if the driver's door were opened after switching off the engine the gear would not switch automatically to "p" as designed.

    Corrective Action:
    Recall the vehicles that are likely to be affected and check the locking of the ball head on the brake pedal. if necessary the pedal mechanism will be replaced.

    24 Affected Units 🚙
    From VIN WBA7G42090G792846 to WBA7G42090G792846

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.