Recalls

Recall R/2017/320

  • UK Recall: Brake booster water shield may be incorrectly installed
    >There is a risk that the brake booster water shield may be incorrectly installed. this may result in limited braking ability due to water ingress into the brake booster.

    Corrective Action:
    On affected vehicles the brake booster water shield must be inspected for proper installation. if the brake booster water shield is found to be missing or incorrectly installed the brake booster must also be vacuum tested. brake boosters that do not pass the vacuum test must be replaced. at the conclusion of this the brake booster must be equipped with a properly installed shield to protect the brake booster crimp joints from water exposure.

    2421 Affected Units 🚙🚙🚙🚙
    From VIN 1C4RDHAG0CC108854 to 1J4RS6GTXBC739604

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.