Recalls

Recall R/2018/158

  • UK Recall: Laser welding between backrest rail and backrest metal fitting of front seats may not meet specification
    >It has been determined that on certain c-class (205) and e-class (213) cars with amg performance seats the laser welding between the backrest rail and the backrest metal fitting of the driver or passenger seat might not meet the specification. the laser welding between the backrest member and the backrest metal fitting may not withstand the required load values. as a result the fitting may detach from the backrest member. in the case of an accident this could result in a higher occupant load. due to the delivery scenario the fault can only occur on one side of the seat.

    Corrective Action:
    As a precautionary measure recall the affected vehicles and check the backrest member and replace if necessary

    46 Affected Units 🚙
    From VIN WDD2130642A358099 to WDD2132892A357694

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.