Recalls

Recall R/2018/289

  • UK Recall: Injector mounting nuts tightening force may be insufficient
    >The tightening force of the injector mounting nuts may be insufficient. this could cause combustion gas to leak from the injector and contaminate the engine oil within the cylinder head. this in turn could cause the engine oil strainer to become blocked. this could cause the engine to stall. engine pressure oil light appears along with the engine malfunction indicator. possible engine stall without warning

    Corrective Action:
    Vehicles affected will have the engine checked for contamination and repaired / replaced if necessary. the fuel injectors will also be re-tightened to the appropriate torque.

    11021 Affected Units 🚙🚙🚙🚙🚙🚙
    From VIN JMZGJ******105981 to JMZGJ******347652

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.