Recalls

Recall RM/2008/003

  • UK Recall: Rear wheel bearing may fail
    >Some motorcycles left the factory with an incorrect circlip fitted to the left hand side of the wheel bearing guide. it is possible for the circlip to rub against the spacing bushing and the resultant metal particles may penetrate the wheel bearing and cause failure. the metal particles may also cause incorrect abs sensor signals where the warning lamp will illuminated but the brake will still function.

    Corrective Action:
    Recall the vehicles that are likely to be affected to replace the rear wheel bearings seals circlip and spacing bushing.

    135 Affected Units 🚙🚙
    From VIN XA60000 to XA62134

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.