Recalls

Recall RM/2009/018

  • UK Recall: Right-hand fork bottom end may fail
    >Machining of the right hand fork bottom end clamp does not comply with the design specification. if ignored this may result in cracking in the area of right handside fork wheel shaft clamp bolt which could impair the safe operation of the machine.

    Corrective Action:
    Recall all affected machines and inspect the right handside fork bottom end clamp. if found to be outside design specification replace with quality assured replacement.

    228 Affected Units 🚙🚙
    From VIN ZDMH704AA8B020786 to ZDMH704AA9B025026

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.