Recalls

Recall RM/2010/024

  • UK Recall: Directional control may be impaired
    >Rear suspension relay lever pivot joint bearings may corrode through ingress of water. this can cause stiffness in the bearings and if not attended to over a protracted period the resistance in the bearings can eventually lead to the joints failing and sagging of the suspension to the extent that it will allow the rear wheel cover to lower onto the rear tyre. should this event occur the speed and possibly the directional control could be impaired.

    Corrective Action:
    Recall the machines that are likely to be affected to replace the original relay levers with re-designed relay levers.

    5360 Affected Units 🚙🚙🚙🚙🚙
    From VIN to

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.