Recalls

Recall RM/2012/023

  • UK Recall: Swinging arm shaft may not be torqued correctly
    >The swinging arm anchor shafts may not have been correctly torqued at the factory. if this concern is not corrected the shafts could unwind and interfere with the foot control operation. additionally this could affect directional control of the machine.

    Corrective Action:
    Recall the machines likely to be affected to re-torque the swinging arm anchor shafts.

    137 Affected Units 🚙🚙
    From VIN ZDMH800ABCB007847 to ZDMH800ABCB009195

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.