Recalls

Recall RM/2015/038

  • UK Recall: Possibility of brake failure
    >The primary cup seal located in the rear master cylinder may not fully seal into the master cylinder bore. riders of affected machines may experience a loss of brake pressure to the rear brake calliper resulting eventually in brake failure. if the concern occurs it can increase the risk of an incident.

    Corrective Action:
    Recall the machines that are likely to be affected and replace the rear master cylinder piston assembly with an updated part.

    26 Affected Units 🚙
    From VIN to

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.