Recalls

Recall RM/2016/041

  • UK Recall: 1. loss of traction; 2. side stand may fail
    >1. the final drive pulley retaining nut may loosen and cause significant wear to the pulley teeth allowing the gearbox secondary shaft to slip in the pulley with the attendant loss of drive. 2. the lower side plate fastening bolt for the side stand may become loose and if not attended to could eventually fail allowing the machine to fall and be a risk to people in close proximity.

    Corrective Action:
    Recall the machines that are likely to be affected to: 1. replace the locking device and retorque the final drive pulley retaining nut. 2. re mount the side stand and plate using new torque settings thread lock and where applicable new bolts..


    350 Affected Units 🚙🚙
    From VIN ZDMGA00AAGB000130 to ZDMGA00AAGB005962

  • © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.