Recalls

Recall RM/2020/006

  • UK Recall: The pivot pin material does not have the correct quality and the yield strength is not sufficient
    >The material of the pivot pin which connects the swinging arm to the rear bevel gear does not have the correct quality

    Corrective Action:
    On affected bikes the pivot pin will be replaced. furthermore the repair manual will be revised as the pivot pins needs to be replaced by any related repair.

    35 Affected Units 🚙
    From VIN WB10J0105L6B99611 to WB10J0105L6B99611

    • Affected Vehicles

    © dot.report 2024

    Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.