Altec At37-g 2011

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2011 ALTEC At37-g.

ManufacturerKnown WMI(s)Fuel Type
ALTEC
ALTEC VIN Decoder

Use the box here to look up VINs from ALTEC as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 2011 ALTEC At37-g?
     - There are 4 recall(s) for the 2011 ALTEC At37-g, additional information is below.
NHTSA Mandated Recalls
  • Recall 98207 [USA]: Oil leaking onto the thermal blanket combined with heat from exhaust may result in an increased risk of fire.

  • Recall 97423 [USA]: If the battery cable shorts to ground, it may overheat, resulting in a fire.

  • Recall 2014318 [Canada]: Accessories

  • Recall 2014023 [Canada]: Accessories

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • SIL 3066 - ELECTRICAL SYSTEM: Altec has learned that operators might be using the crane and unit simultaneously on certain altec units equipped with venturo, liftmoore, and autocrane service cranes built from march 2009 to august 2022. These units were designed for sing
  • SIL 3033 - SUSPENSION: Altec has learned that on certain at37-g aerial devices built from november 2007 to april 2018, the rear torsion bar swing arm can interfere with the long runner channels under the body as the torsion bar rotates during road travel. The int
  • No comms 2021-12 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for december 2021 for altec industries, inc.
  • SIL 811-818 - ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION: Altec has learned that certain at35/37-g and at40-g aerial devices built between february 2008 and january 2016 have power wiring for the 12v hydraulic oil reservoir heater which could be insufficient to carry the electrical current require

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.