Altec At37-g 2013
Vehicle Details: Recalls, Service Bulletins
Below you will find all available information on the 2013 ALTEC At37-g.
Manufacturer | Known WMI(s) | Fuel Type |
---|---|---|
ALTEC |
ALTEC VIN Decoder
Use the box here to look up VINs from ALTEC as well as other manufacturers
Frequently Asked Questions
-
Are there recalls for the 2013 ALTEC At37-g?
- There are 2 recall(s) for the 2013 ALTEC At37-g, additional information is below.
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- SIL 3066 - ELECTRICAL SYSTEM: Altec has learned that operators might be using the crane and unit simultaneously on certain altec units equipped with venturo, liftmoore, and autocrane service cranes built from march 2009 to august 2022. These units were designed for sing
- SIL 3033 - SUSPENSION: Altec has learned that on certain at37-g aerial devices built from november 2007 to april 2018, the rear torsion bar swing arm can interfere with the long runner channels under the body as the torsion bar rotates during road travel. The int
- No comms 2021-12 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for december 2021 for altec industries, inc.
- SIL 811-818 - ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION: Altec has learned that certain at35/37-g and at40-g aerial devices built between february 2008 and january 2016 have power wiring for the 12v hydraulic oil reservoir heater which could be insufficient to carry the electrical current require
- SIL 728 - EQUIPMENT ADAPTIVE/MOBILITY: Altec discovered that one of the fasteners used to attach the rear shear plate on the subbase of the unit to the chassis can contact the chassis u-bolt. The fastener can be a huck bolt or a bolt and nut. Movement of the u-bolt can possibly