Altec Cable-tensioner 2021

Vehicle Details: Service Bulletins

Below you will find all available information on the 2021 ALTEC CABLE-TENSIONER.

ManufacturerKnown WMI(s)Fuel Type
ALTEC
ALTEC VIN Decoder

Use the box here to look up VINs from ALTEC as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • SIL-3136 - EQUIPMENT: Altec has learned that a retaining ring was not installed on the capstan shaft of certain cable tensioning trailers built from june 2017 to june 2023. This could result in the capstan detaching from the motor on the affected units.
  • SIL 3041 - EQUIPMENT: Altec has learned that when the coolant-style oil heater on certain ah75b/85B100B aerial devices built from april 2021 to august 2022 is active, the operator has to turn off the engine in order to disengage the power take-off (pto). Replace
  • SIL-3010 - EQUIPMENT: Altec has learned that operators of ts336 series conductor tensioners and ts40-pt conductor pullers built from october 2015 to july 2022 may not always tighten the bolts properly on the locking/lift weldment, and may allow the arbor bar to

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.