Altec Pressure-digger 2021
Vehicle Details: Service Bulletins
Below you will find all available information on the 2021 ALTEC PRESSURE-DIGGER.
Manufacturer | Known WMI(s) | Fuel Type |
---|---|---|
ALTEC |
ALTEC VIN Decoder
Use the box here to look up VINs from ALTEC as well as other manufacturers
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- SIL 3039 - EQUIPMENT: Altec has learned that the hydraulic ball valve on the hydraulic reservoir return line of hd35a pressure diggers built from september 2014 to november 2022 may not get returned to the open position after being turned to the closed position
- SIL 3041 - EQUIPMENT: Altec has learned that when the coolant-style oil heater on certain ah75b/85B100B aerial devices built from april 2021 to august 2022 is active, the operator has to turn off the engine in order to disengage the power take-off (pto). Replace
- SIL 3038 - POWER TRAIN: Altec has learned that output drive sleeve on certain hd35a pressure diggers built from may 2020 to january 2021 may fail suddenly during use, generating a large quantity of debris in the auger transmission gearbox. If the unit is not shut
- No comms 2021-12 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for december 2021 for altec industries, inc.
- SIL 808 - EQUIPMENT: Altec has learned that supplier-provided auger transmission gearboxes for the hd35a derricks built from may 2020 to january 2021 have an oversized square-drive opening for the kelly bar in the output drive sleeve. This results in an imprope