Bmw 318 1992

• Recall 18650 [USA]: Fuel seepage between the feed fuel hose and the engine fitting can result in free fuel in the engine compartment, which could result in a fire when exposed to a source of ignition.
  Feed fuel hoses can harden and "set" over time, allowing a seepage of fuel at the connection between the hose and the engine fitting. The clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose.
  a redesigned feed fuel hose and hose clamp will be installed to alleviate the fuel seepage.
  system: fuel; fuel line fittings; metallic.Vehicle description: passenger vehicles; models 318i, 318si, 318ic, 325i, 325is, 325ix, 325ic, 525i, 535i, 735i and 735il.Note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and free of charge, or the remedy does not correct the defect or noncompliance, please contact bmw at 1-800-831-1117. Also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

  Show Content

• Recall 19499 [USA]: If loss of throttle control from the frozen throttle body occurs while the vehicle is in motion, a vehicle crash could occur.
  The adhesive material of the two piece throttle body heater migrates into the circulation chamber causing build up of impurities and restriction of flow within the chamber. This condition and water vapors from the crank that freezes at low ambient air temperatures prevents the throttle plate from closing as the driver releases the gas pedal, causing loss of throttle control.
  bmw dealers will replace the throttle body heater with a modified heater.
  system: fuel; fuel injection system.Vehicle description: passenger vehicles, model 318i and 318is.Note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and free of charge or the remedy does not correct the defect or noncompliane, please contact bmw service center at 1-201-573-2100. Also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

  Show Content

• Recall 20417 [USA]: Vehicles operated under this increased cooling systempressure condition can suffer damage or failure of parts of the cooling systemsuch as (1) leakage from a coolant hose, (2) leakage of the radiator orexpansion tank, (3) disconnection of a hose from a pipe or a fitting, and (4)cracks in the heater core end piece resulting in coolant leakage. in some cases,boiling coolant can contact the lower right leg of the driver resulting inburns. also, escaping coolant in the passenger compartment can cause vaporfogging of the interior surface of the windows, reducing driver visibility.
  The malfunction or failure of a coolant system component results in significantly increased coolant temperature and a resulting increase in system pressure.
  dealers will install a thermostatic bypass valve in the engine compartment to control coolant temperature in the heater core. Also, a new design radiator cap will be installed, to control pressure and provide greater coolant overflow in the event of overheating.
  system: coolant system.Vehicle description: passenger cars.

  Show Content

• Recall 21050 [USA]: If the throttle plate is prevented from closing, thereis an increase in idle speed as well as slower than normal deceleration, whichoccurs without prior warning and could result in an accident.
  The crankcase ventilation system, vented into the intake tract of the engine at the bellows boot ahead of the throttle housing, allows warm water vapor from the crankcase vent to condense and freeze in the colder bellows boot when the ambient air temperature is 15 degrees fahrenheit or less. The build up of ice can dislodge and move into the throttle housing, preventing the throttle plate from fully closing when the driver releases the gas pedal.
  replace the throttle housing with a version containing a modified heating system along with rerouting of the cvs hose. This will prevent ice build-up in the intake tract.
  system: throttle linkages and control.Vehicle description: passenger vehicles.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Air bag wiring failure investigation # EA95013

  There is no summary currently available
  

  Show Content

• Heater core failure investigation # EA92017

  There is no summary currently available
  

  Show Content

Consumer is having problems with starter, she has taken it back to dealer twice already to have it replaced.*ak

The affected gasket is known to be of a defective nature and is prone to failure at some point in the vehicle's life, possibly resulting in a sudden loss of coolant. The original part and replacement parts are referenced in a bmw technical service bulletin 11 10 93 (3885). Thus far, bmw has chosen only to evaluate each case individually and selectively reimburse owners for the cost of repairs for vehicles which are out of warranty.

Clamp and hose from gasoline tank failed.

A gasket wears out in the engine valve train, causing coolant loss. *ak

Engine profile gasket failure, causing loss of hot coolant, resulting in a fog of white steam which could impair visibility. *ak

Engine gasket failed, causing coolant leak. *ak

Engine timing chain/engine main head gasket failed. *ak

The head and the gaskets and they are porus and they fall apart. Please describe. Tt

With temperatures ranging from 95 degrees or more rear window emploded while not in direct sunlight. Please describe details. *ak