Bmw 318 1993

• Recall 18651 [USA]: Fuel seepage between the feed fuel hose and the engine fitting can result in free fuel in the engine compartment, which could result in a fire when exposed to a source of ignition.
  Feed fuel hoses can harden and "set" over time, allowing a seepage of fuel at the connection between the hose and the engine fitting. The clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose.
  a redesigned feed fuel hose and hose clamp will be installed to alleviate the fuel seepage.
  system: fuel; fuel line fittings; metallic.Vehicle description: passenger vehicles; models 318i, 318si, 318ic, 325i, 325is, 325ix, 325ic, 525i, 535i, 735i and 735il.Note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and free of charge, or the remedy does not correct the defect or noncompliance, please contact bmw at 1-800-831-1117. Also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

  Show Content

• Recall 19500 [USA]: If loss of throttle control from the frozen throttle body occurs while the vehicle is in motion, a vehicle crash could occur.
  The adhesive material of the two piece throttle body heater migrates into the circulation chamber causing build up of impurities and restriction of flow within the chamber. This condition and water vapors from the crank that freezes at low ambient air temperatures prevents the throttle plate from closing as the driver releases the gas pedal, causing loss of throttle control.
  bmw dealers will replace the throttle body heater with a modified heater.
  system: fuel; fuel injection system.Vehicle description: passenger vehicles, model 318i and 318is.Note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and free of charge or the remedy does not correct the defect or noncompliane, please contact bmw service center at 1-201-573-2100. Also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Air bag wiring failure investigation # EA95013

  There is no summary currently available
  

  Show Content

Profile gasket leak.

Engine timing case profile gasket failed, causing vehicle to suddenly veer from the third lane to the shoulder by the first lane.

Engine lost coolant, engine melted, replaced engine. *ak

Engine head gasket failed.

Profile gasket failed, resulting in loss of anti-freeze. *ak

Failed head gaskets caused vehicle to overheat.

Profile case gasket failed, causing all engine fluid to spill onto freeway at speed. This is a factory defect which needs to be addressed before it can cause a serious accident. *ak

Profile gasket failed due to design problem, causing coolant leaks. *ak

Replaced the leaking timing case profile gasket. *ak