Bmw 325 I 1990

• Recall 18653 [USA]: Fuel seepage between the feed fuel hose and the engine fitting can result in free fuel in the engine compartment, which could result in a fire when exposed to a source of ignition.
  Feed fuel hoses can harden and "set" over time, allowing a seepage of fuel at the connection between the hose and the engine fitting. The clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose.
  a redesigned feed fuel hose and hose clamp will be installed to alleviate the fuel seepage.
  system: fuel; fuel line fittings; metallic.Vehicle description: passenger vehicles; models 318i, 318si, 318ic, 325i, 325is, 325ix, 325ic, 525i, 535i, 735i and 735il.Note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and free of charge, or the remedy does not correct the defect or noncompliance, please contact bmw at 1-800-831-1117. Also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

  Show Content

• Recall 20424 [USA]: Vehicles operated under this increased cooling systempressure condition can suffer damage or failure of parts of the cooling systemsuch as (1) leakage from a coolant hose, (2) leakage of the radiator orexpansion tank, (3) disconnection of a hose from a pipe or a fitting, and (4)cracks in the heater core end piece resulting in coolant leakage. in some cases,boiling coolant can contact the lower right leg of the driver resulting inburns. also, escaping coolant in the passenger compartment can cause vaporfogging of the interior surface of the windows, reducing driver visibility.
  The malfunction or failure of a coolant system component results in significantly increased coolant temperature and a resulting increase in system pressure.
  dealers will install a thermostatic bypass valve in the engine compartment to control coolant temperature in the heater core. Also, a new design radiator cap will be installed, to control pressure and provide greater coolant overflow in the event of overheating.
  system: coolant system.Vehicle description: passenger cars.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Heater core failure investigation # EA92017

  There is no summary currently available
  

  Show Content

Regarding my 1990 bmw 325 convertible. The covering under the steering wheel above the pedals will fall on my feet when i am driving, my feet get caught and i have to pull over and push the covering off my feet and shove it back over the pedals. There is a place for it to lock into except to sit above the pedals. It is very scary when my feet get caught, i am constantly moving my feet to push in the clutch pedal. I was getting my oil changed and the person working there said he also had that problem with his bmw 325 convertible. *jb

Brake lights were inoperative; in addition, cannot open the unlocked door from inside/ driver's seat wobbles and seat heater overheated, burning driver. *ak

Sudden unintended acceleration, vehicle surged forward unexpectedly. Tt

Engine hcooling system leaked and the engine burned up. Please describe. *ak

Passengers airbag did not deploy during front end collison; rearended another vehicle; three car collision; one sensor crushed upon impact. Tt

Consumer had recall #93v015000, fixed a year ago, consumer was driving and the car engine cooling light came on and the car overheated . Please describe .*ak