Bmw 325 1991

• Recall 18654 [USA]: Fuel seepage between the feed fuel hose and the engine fitting can result in free fuel in the engine compartment, which could result in a fire when exposed to a source of ignition.
  Feed fuel hoses can harden and "set" over time, allowing a seepage of fuel at the connection between the hose and the engine fitting. The clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose.
  a redesigned feed fuel hose and hose clamp will be installed to alleviate the fuel seepage.
  system: fuel; fuel line fittings; metallic.Vehicle description: passenger vehicles; models 318i, 318si, 318ic, 325i, 325is, 325ix, 325ic, 525i, 535i, 735i and 735il.Note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and free of charge, or the remedy does not correct the defect or noncompliance, please contact bmw at 1-800-831-1117. Also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

  Show Content

• Recall 20425 [USA]: Vehicles operated under this increased cooling systempressure condition can suffer damage or failure of parts of the cooling systemsuch as (1) leakage from a coolant hose, (2) leakage of the radiator orexpansion tank, (3) disconnection of a hose from a pipe or a fitting, and (4)cracks in the heater core end piece resulting in coolant leakage. in some cases,boiling coolant can contact the lower right leg of the driver resulting inburns. also, escaping coolant in the passenger compartment can cause vaporfogging of the interior surface of the windows, reducing driver visibility.
  The malfunction or failure of a coolant system component results in significantly increased coolant temperature and a resulting increase in system pressure.
  dealers will install a thermostatic bypass valve in the engine compartment to control coolant temperature in the heater core. Also, a new design radiator cap will be installed, to control pressure and provide greater coolant overflow in the event of overheating.
  system: coolant system.Vehicle description: passenger cars.

  Show Content

• Recall 20668 [USA]: The intermittent or complete loss of the wiper circuitground causes the wipers to operate erratically or not at all, resulting inreduced visibility for the driver in inclement weather conditions.
  The screw that secures the wiper switch at one location and which also provides a ground for the wiper circuit, loosens as the switch is operated over a long period of time. As the screw continues to loosen the ground for the wiper circuit is intermittently or completely lost.
  relocate the wiper switch ground wire attachment on the steering column.
  system: visual; windshield wiper.Vehicle description: passenger cars.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Air bag wiring failure investigation # EA95013

  There is no summary currently available
  

  Show Content

• Heater core failure investigation # EA92017

  There is no summary currently available
  

  Show Content

Consumer was driving on the street at 25 mph under normal road conditions when suddenly heard a loud cracking sound and engine stopped running. Dealer was not notified. *ak

Back window looks like it is completely shattered. Please describe details. Tt

Driver's side air bag did not deploy at 50 mph when rear ended. Please describe. Tt

Front wheel broke through the floor board. Cruise control would not disengage. *ak

Possible engine failure resulted in vehicle fire.

Vehicle was in use when driver's side seat belt popped out of buckle and would not go back in, causing loss of protection. *ak