Bmw 525 1989

• Recall 18657 [USA]: Fuel seepage between the feed fuel hose and the engine fitting can result in free fuel in the engine compartment, which could result in a fire when exposed to a source of ignition.
  Feed fuel hoses can harden and "set" over time, allowing a seepage of fuel at the connection between the hose and the engine fitting. The clamp used to hold the hose to the fitting is unable to compensate for the hardening of the feed fuel hose.
  a redesigned feed fuel hose and hose clamp will be installed to alleviate the fuel seepage.
  system: fuel; fuel line fittings; metallic.Vehicle description: passenger vehicles; models 318i, 318si, 318ic, 325i, 325is, 325ix, 325ic, 525i, 535i, 735i and 735il.Note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and free of charge, or the remedy does not correct the defect or noncompliance, please contact bmw at 1-800-831-1117. Also, contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

  Show Content

• Recall 22412 [USA]: If the fusible link breaks, the total vehicle electricalsystem would be interrupted by the open circuit. all electrical systems wouldbe involved, and the engine would not start, or would stop, if running. thiswould result in loss of power to the vehicle without prior warning, loss ofhazard warning lights, loss of lights at night and possibly a vehicle accident.
  The 80-ampere fusible link located in the engine compartment can develop mechanical weakness due to aging and thermal stresses, and can break.
  reroute the electrical cables in the engine compartment to reduce the current flow through the fusible link, and replace the old fusible link.
  system: electrical system.Vehicle description: passenger vehicles, models 525i and 525ia.

  Show Content

• Recall 23363 [USA]: Occupant would not be properly restrained and could be injured in the event of a sudden stop or accident.
  Under certain conditions, front seat center, fold-down arm rest may contact the safety belt buckle, causing damage to the release button and preventing the belt tongue from latching when buckling up.
  replace front seat safety belt buckles with shorter version that will not contact the armrests. Note: owner notification date; 2/90 is prepared in draft form.
  system: safety belt buckle.Vehicle description: passenger cars.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Electrical system problems, causing cluster module/power windows/alarm/power door locks to fail. *ak

Instrument cluster failed, causing failure of dashboard and engine safety warning systems. *skd

Was in an accident and the air bag didn't deploy. Tt