2007 BMW G 650 X Us MotoBmw G 650 X Us Moto 2007

Vehicle Details: Recalls, Consumer Complaints, Service Bulletins

Below you will find all available information on the 2007 BMW G 650 X Us Moto.

ManufacturerKnown WMI(s)Fuel Type
BMW
BMW VIN Decoder

Use the box here to look up VINs from BMW as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 2007 BMW G 650 X Us Moto?
     - There are 2 recall(s) for the 2007 BMW G 650 X Us Moto, additional information is below.
NHTSA Mandated Recalls
  • Recall 83721 [USA]: If this occurs, it would be possible for fragments of the attachment to become trapped between the drive chain and the rear sprocket. the rear wheel could lock up, possibly resulting in a crash.

  • Recall RM/2007/029 [UK]: Correct chain tensioners may not be fitted

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • B611305 - ELECTRICAL SYSTEM: The electrical system of bmw vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on ho
  • B611305 - EQUIPMENT ADAPTIVE/MOBILITY: Discharged battery energy diagnosis must be performed: the electrical system of bmw vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This doc
  • SIB-11-03-08 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV): Bmw: crankcase pressure diagnosis and information for all vehicles. *rm updated on 4/24/2013. *kb
  • SIB-63-02-01 - EXTERIOR LIGHTING: Bmw: procedure for determining and replacing incandescent and halogen light bulbs under warranty. *rm
  • TB-34-003-10 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS: Bmw motorcycle: repair set for brake pipe distributor bracket. All models (k15) have a brake pipe distributor held by frame mounted bracket just behind the steering head. This frame mounted bracket can develop cracks. A repair set that
  • SIB-16-02-09 - FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP: Bmw vehicles: fuel level sensor repairs. Where it is necessary to replace the right or the left side fuel level sensor due to a failure, the entire pump and housing or delivery unit (suction jet assembly) do not need to be replaced as wel
  • SB-00-021-07 - FUEL SYSTEM, OTHER: Bmw motorcycle: engine fuels containing ethanol. Bmw motorrad has no objection to the use of si engine fuels containing up to a maximum of 10% ethanol and imposes no warranty restrictions. Ethanol mixtures in proportions higher than 10%
  • SB-13-002-07 - FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS: Bmw motorcycle: replacement of fuel line and termination of the engine test run to check the fuel hose campaign. In isolated instances, fuel lines suffered incipient damage in the course of the manufacturing process. Lines damaged in thi
  • 13-002-07 - FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS: Bmw motorcycle: replacement of fuel line and termination of the engine test run to check the fuel hose campaign. *pe updated 10/16/08. *pe
Most Recent Consumer Complaints and Accidents
CrashFireTowedInjuredDeathsFailure
Date
NoNoN NoneNone20080131

Tl*the contact owns a 2007 bmw g 650 x us moto. The contact stated that the vehicle shuts off every time it is started. The dealer made repairs, but they only lasted for a month. Currently, the vehicle shuts off each time the vehicle comes to a complete stop. Bmw of america will not repair the vehicle, but is willing to work something out with the contact. The current mileage was 11,000 and failure mileage was 4,000.

NoNoN NoneNone20071019

I recently purchased a 2007 bmw f800st motorcycle with abs. On two separate instances, on dry roads, the abs has "failed" in that the motorcycle failed to respond to the front brake. On the second instance it was going into a gas station where the rear suspension compressed and rebounded, evidently telling the abs i was on a slick surface and reducing brake pressure available to the front brake! This information is in the owners' manual, that compression can lead the system to believe it is on a slick surface. No accident yet, but this does not seem to be an isolated occurrence if you visit f800riders.Org. I was shocked to see this is worldwide. *tr

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.