Use the box here to look up VINs from BMW as well as other manufacturers
Frequently Asked Questions
Where is the 2008 BMW Hp2 Megamoto produced?
- The 2008 BMW Hp2 Megamoto is produced in Munich Bavaria, Germany.
Are there recalls for the 2008 BMW Hp2 Megamoto?
- There are 7 recall(s) for the 2008 BMW Hp2 Megamoto, additional information is below.
NHTSA Mandated Recalls
Recall 142635 [USA]: A fuel leak in the presence of an ignition source can increase the risk of a fire.
Bmw of north america, llc (bmw) is recalling certain 2009-2011 k1300 (s, gt), 2010-2011 s1000 rr, 2005-2011 r1200 (gs, gs adventure, r, rt, s, st), 2006-2010 hp2 (enduro, megamoto, sport), 2005-2008 k1200 (r, r sport, s, gt), and 2012 k1600 (gt, gtl) motorcycles that were repaired under recall 13v-617 with the support ring remedy and where the fuel pump was not replaced at a later date. This recall involves the fuel pump, and also the auxiliary fuel pump as applicable. The affected motorcycles have a fuel pump flange that may crack, possibly resulting in a fuel leak while the engine is running. bmw will notify owners, and dealers will replace the fuel pump(s) with an improved version, free of charge. The recall began january 18, 2021. Owners may contact bmw customer service at 1-800-525-7417. owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.
Recall 114911 [USA]: If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash.
Bmw of north america, llc (bmw) is recalling certain model year 2005-2010 r1200gs and r1200rt, 2006-2010 r1200gs adventure, 2007-2010 r1200r, 2007 r1200s and k1200r sport, 2005-2007 r1200st, 2008-2009 hp2 megamoto, 2006 hp2 enduro, 2008-2010 hp2 sport, 2005-2008 k1200s, 2006-2008 k1200r, k1200gt, 2009-2011 k1300s, 2010-2011 k1300r, and 2009-2010 k1300gt motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened. bmw will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall began on may 7, 2015. Owners may contact bmw customer service at 1-800-525-7417. owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.
Recall 101434 [USA]: A fuel leak in the presence of an ignition source may result in a fire.
Bmw of north america, llc (bmw) is recalling certain model year 2005-2011 model year r-model motorcycles, model year 2005-2012 k-model motorcycles, model year 2010-2011 s 1000 model motorcycles, and model year 2006-2010 hp2 motorcycles. In the affected motorcycles, the fuel pump flange (and the auxiliary fuel pump flange if equipped) could develop cracks and leak fuel. bmw will notify owners, and dealers will either reinforce the fuel pump flange or replace the pump, as necessary, free of charge. The recall began on april 16, 2014. Owners may contact bmw customer relations at 1-800-525-7417 or email bmw at [email protected]. owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.
Recall 2020437 [Canada]: Fuel supply
Issue: on certain motorcycles, the fuel pump flange could crack. If this happens, fuel could leak while the engine is running. Note: this recall only affects motorcycles that did not have the fuel pump replaced under transport canada recall 2013-442. Safety risk: a fuel leak can create the risk of a fire. Corrective actions: bmw will notify owners by mail and instruct you to take your motorcycle to a dealer to replace the fuel pump and auxiliary fuel pump (if equipped) with an improved version.
Recall 2017428 [Canada]: Lights and instruments
Certain motorcycles with dealer installed accessory turn signals may not comply with the requirements of canada motor vehicle safety standard (cvmss) 108 - lighting system and retroreflective devices. The size of the lens on the accessory turn signals may be too small, and therefore would not meet the requirements of the standard. This could reduce vehicle conspicuity to following and approaching road users, and increase the risk of a crash causing injury and/or property damage. Correction: dealers will replace the accessory turn signals with factory indicators that meet the requirements of the standard.
Recall 2015101 [Canada]: Powertrain
On certain motorcycles, the threaded holes on the rear wheel flange could crack if the wheel bolts are tightened beyond the specified torque limit during servicing. Over time, this could allow the bolts to back out of their threaded holes, causing the rear wheel to become loose. This could result in a loss of stability of the motorcycle, and increase the risk of a crash causing injury and/or property damage. Correction: dealers will replace the aluminum rear wheel flange with a steel flange.
Recall 2013442 [Canada]: Fuel supply
On certain motorcycles, cracks could develop in the fuel pump and/or auxiliary fuel pump flange (if equipped). This would result in fuel leaking when the engine is turned on and the fuel system is pressurized. Leaking fuel, in the presence of an ignition source, could lead to a fire causing injury and/or damage to property. Correction: dealers will inspect the fuel pump flange(s) and install a reinforcing ring or replace the fuel pump(s), as necessary.
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
B611305 - ELECTRICAL SYSTEM: The electrical system of bmw vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on ho
MC000521 - ELECTRICAL SYSTEM: One of the following situations can occur when connecting to bn2000 motorcycles: 1. The installed control units cannot be found when reading out with ista. 2. Control units initially communicate after connecting to the vehicle, but communic
B611305 - EQUIPMENT ADAPTIVE/MOBILITY: Discharged battery energy diagnosis must be performed: the electrical system of bmw vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This doc
MC64010520 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Incorrect tire pressure appears in the instrument cluster. Contamination or obstruction of the rdc sensor.