Bmw R1150gs 2003

• Recall 2004026 [Canada]: Fuel supply
  On certain motorcycles, the crimp-type hose clamps along the fuel line may not have been installed properly and could leak. Fuel leakage in the presence of an ignition source could result in a fire. Correction: dealer will inspect, and if necessary, adjust all crimp-type hose clamps.

  Show Content

• Recall 2003201 [Canada]: Brakes
  On certain motorcycles, the rear brake hose may split open during riding conditions in which a full extension of the rear suspension occurs. As a result, a loss of brake fluid and brake pressure can occur. Correction: dealer will replace and reroute the rear brake hose.

  Show Content

• Recall 2003258 [Canada]: Engine
  On certain motorcycles, the signal from the ignition lead of the secondary spark plug on the right hand cylinder could interfere with the oxygen sensor signal and cause the engine management control unit to reset. As a result, throttle response can be poor to the extent of engine misfire. Correction: dealer will reroute the oxygen sensor cable.

  Show Content

• Recall 2002248 [Canada]: Powertrain
  On certain motorcycles, the 3rd and 4th gear (shift) wheels may not be securely seated on the intermediate shaft. Consequently, when attempting to shift from 5th to 6th gear, engagement of two (5th and 6th) gears may occur simultaneously. If this happens, the gear wheel may crack resulting in a loss of transmission capability, or, a lock of the transmission may occur. If the latter occurs, the rear wheel may lock which, depending upon traffic and road conditions, and the rider's reaction, could affect the stability of the motorcycle. Correction: dealer will replace the transmission gearbox.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Final drive failure causing oil to spill onto rear tire while riding. This is the same failure as described in odi no. 10439549, and currently being investigated under campaign dP12001. *tr

Crown gear bearing failure, no oil leak. Progressive vibration felt in footpegs and seat, several very brief rear wheel lock-ups. Metal fuzz on magnetic plug, pulled the drive, sent to an independent expert (not a bmw dealer) who confirmed the failure and rebuilt the drive. *tr

Common OBD-II Error Codes

• P1200 [1] SCP HBCC Failed To Initialize