Chevrolet C/k Pickups 2002
Vehicle Details: Investigations, Consumer Complaints, Service Bulletins
Use the box here to look up VINs from CHEVROLET as well as other manufacturers
-
Where is the 2002 CHEVROLET C/k Pickups produced?
- The 2002 CHEVROLET C/k Pickups is produced in Warren Michigan, United States (usa).
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- SB-10-08-50-003B - SEATS:FRONT ASSEMBLY:HEAD RESTRAINT: General motors: information provided by bulletin for all 2012 and prior general motor trucks and passenger vehicles regarding the adjustable comfort and custom upholstery of the driver and the passenger head restraint. *pe
- 3170E - INTERIOR LIGHTING: Ipc, interior lights and/or headlamps flicker. *ak fb2
- 01050 - SERVICE BRAKES, HYDRAULIC:BRAKE FLUID LOW WARNING: LAMP: Some vehicles have a brake system warning light in the instrument cluster that may not illuminate when the brake fluid is low, when this occurs, the vehicle may not meet the partial system requirement of reduced braking capability. *sl
Parking brake failure investigation # DP05009
There is no summary currently available
Hydraulic pump failres investigation # EA04012
Gm is conducting a recall on all subject vehicles build between may 1999 and october 14, 1999.Significant changes were incorporated into production in early october 1999, and vehicles built after that date have lower warranty failure rates.The complaint and warranty data appear to support the effectiveness of these changes. Gm made additional changes in november 1999, february 2000, may 2001, and february 2004.Odi will continue to monitor this problem and will take further action, if warranted, in the future.For further technical details see the attached engineering analysis report.
Parking brake failure investigation # EA04011
There is no summary currently available
Crash | Fire | Towed | Injured | Deaths | Failure Date |
---|
Crash | No | N | None | None | 20150630 |
Initially we had the brakes changed, then we took it to the repair shop and they were test driving it, and tried to stop the truck, and ran into the welder in the shop and destroyed the welder and wrecked the front bumper of our truck. We then had the bearings worked on. After researching on the internet, i found where some trucks were recalled for this problem of the anti lock brake system engaging at slow speeds. Our truck has a vibration in the brake pedal when trying to stop, but it only occurs at the final stage of stopping, at slow speeds. It has occured numerous times, and with no weather conditions on the road.
No | No | N | None | None | 20101024 |
I purchased a 2002 chev. K1500 5.3liter 4x4 pickup in oct. 2010. Once i took the truck home the brakes started acting up. I contact gm and they advised the truck had a recall on the abs system but the recall had been perform on the truck and they could not do any more for me. I thought if it was a safety problem they had to fix the problem. What is happening is the abs system is kicking in at low speed under 10mph. When you are pulling into a parking spot or at a cross walk. And the truck will take twice the distance to stop. They do not think they are needing to do anything with the problem. But, they are doing a dissatisfaction to the consumer. I am a employee at a auto repair shop. And we are seeing 1 or 2 a month with the same problem. I feel gm need to stand behind the product and they are not. It is going to take someone to have the abs brake kick in and run someone over. Before they do anything about it. I feel this is a problem that may need to be look into very closely because it is happening on more then just the trucks. Cars and suv are also having the same problems. *tr
No | No | N | None | None | 20100910 |
I own a 2002 silverado 1500. Several months ago i had problems with the abs brakes kicking in at about 5 mph and nearly causing several accidents. After some research i was able to clean the abs sensors and mounting areas and once again have brakes. However,now(sept. 2010) the metal brake lines under the drivers door rusted through and nearly caused an accident with 3 people inside,including my son and his 3 year old son. I am having it taken to a garage to get an estimate for repair. I have had many vehicles, none of which have had these problems. *tr
No | No | N | None | None | 20091203 |
The anti-lock brakes kick in at slow speeds. This has almost caused me to wreck. They issued a recall for my brakes, but all they do is clean the sensor, so when they get dirty, they start doing it again. I contacted my chevy dealer,and he said they could look at it, might have to charge me though. *tr
No | No | N | None | None | 20081009 |
Started out to work one morning,truck performed fine. Stopped for gas restarted truck,noticed that brake pedal went down considerable amount further than normal ,and it took more foot pressure to stop. Continued to work,worked,drove home. By the time i got home brake pedal went to floor,and had no stopping power. Next morning checked brake master cylinder reservoir ,it was empty. I than noticed puddle of fluid under driverside of truck. I checked under the hood and noticed to my surprise rust through on the steel brake line. Dealer was contacted was told they would look at it. Had truck towed to dealer,service manager wanted guarantee of payment of 40 dollars and change to look at it,to confirm what i already knew that the brake lines were rusted. They said this was normal and would not take any responsibility to repair it,only to offer small credit towards parts,which amounts to nothing. I don't know where to go now ,and are making arrangements to have it towed back home. *tr
No | No | N | None | None | 20071127 |
2002 chevrolet 1500 silverado pickup 4 wheel drive automatic transmission, parking brake fails and goes to floor.........It has never been used and does not work ...Fail state inspection.......Defective design. *tr
No | No | N | None | None | 20070729 |
I relied on the parking brake while i was doing some work. The parking brake failed to hold, and the vehicle rolled. Luckily i nearly avoided being struck. Further analysis shows that this is a problem on all chevy and gm pickup trucks for 2002. There was a recall for the vehicles with manual transmissions, but not those with automatic transmissions. The vehicles with automatic transmissions have the exact same problem, but the transmission must be relied on to hold the vehicle. The manufacturer refuses provide the upgraded parking brake system for these vehicles. The parking brake system was redesigned on 2003 vehicles because of this problem. In order to properly review this issue, nhtsa needs to look at the complaints for all gm and chevy pickup trucks. You will see a multitude of listings for parking brake problems. Vehicles with automatic transmissions should have been covered under the recall of nhtsa 05v161000 as there is no mechanical difference between the parking brake systems on the manual and automatic systems. *tr
No | No | N | None | None | 20070705 |
Abs pulsated at low speeds and did not stop, almost causing an accidents. Had to pull abs fuse to disable it. *ak
No | No | N | None | None | 20050705 |
The abs brake system fails at slow speeds making it almost impossible to stop the vehicle. The first time it happened i nearly entered a busy highway as i was unable to stop promptly. After a few days it happened again and i nearly hit a building as i was trying to stop in a parking space. It was obvious that this was a safety problem. However the authorized repair facility would not make the necessary repairs unless i paid the bill. They had to clean the abs sensors to correct this problem. *jb