Chevrolet Malibu Classic 1978
Vehicle Details: Recalls, Crash Tests, Investigations, Consumer Complaints, Service Bulletins
Use the box here to look up VINs from CHEVROLET as well as other manufacturers
-
Where is the 1978 CHEVROLET Malibu Classic produced?
- The 1978 CHEVROLET Malibu Classic is produced in Warren Michigan, United States (usa).
-
Are there recalls for the 1978 CHEVROLET Malibu Classic?
- There are 10 recall(s) for the 1978 CHEVROLET Malibu Classic, additional information is below.
-
How much does the 1978 CHEVROLET Malibu Classic weigh?
- The 1978 CHEVROLET Malibu Classic is listed to weigh 1724 lbs.
Recall 89400 [USA]: This condition may cause inadequate sealing and loss of engine oil, possibly resulting in a fire.
Recall 28943 [USA]: Note: owner notification will begin after september 1, 1985 and should be completed by september 30, 1985.vehicle description:
Recall 1986056 [Canada]: Brakes
Recall 1985007 [Canada]: Brakes
Recall 1985008 [Canada]: Seats and restraints
Recall 1985010 [Canada]: The axle retaining "c" clip in the differential may dislodge and allow the axle, wheel and brake drum to separate from the veh
Recall 1985049 [Canada]: Brakes
Recall 1984035 [Canada]: These vehicles may not comply with cmvss 1103 - exhaust emissions.
Recall 1981027 [Canada]: Suspension
Recall 1979123 [Canada]: For recall information older than 1980 contact 1-800-333-0510 or 613-993-9851
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- 3253 - POWER TRAIN:AUTOMATIC TRANSMISSION: Vehicle will not move in either direction. Transmission may show over full. P90 4t40e 4t45e no movement drive or reverse. Converter may be empty of fluid. *tt
Brake backing plate investigation # EA86006
Summary:gm is conducting a voluntary recall campaign (85v-048)involving 2,136,826 vehicles. The recall is limited to vehicles built atcertain assembly plants which, according to gm, overtorqued the brakepipe nut,thereby overstressing the wheel cylinder support area of thebacking plate.Analysis:front brakes provide sufficient braking for passenger carsin most non-emergency situations. All affected trucks are included inthe current recall.In most cases the problem is discovered during brakemaintenance.The recall appears to cover those groups of cars with thehighest failure rates.Status:analyzing gm ir response and new complaint data. Draft closingreport by 5/15/88.===
Crash | Fire | Towed | Injured | Deaths | Failure Date |
---|
No | No | N | None | None | 20020607 |
Nhtsa recall 85v143000 on hydraulic brake:shoe and drum wheel cylinders: consumer while applying brake pedal, it went to the floor, and vehicle continued on before stopping. Notified dealer, and manufacturer ;and neither one could inform consumer if vehicle was or not covered under this recall. Feel free to provide any further infromation.*ak
No | Fire | N | None | None | 19970820 |
Engine fire.