CHEVROLET T-SERIESChevrolet T-series

Vehicle Details: Service Bulletins

Below you will find all available information on the CHEVROLET T-SERIES.

ManufacturerKnown WMI(s)Fuel Type
CHEVROLET
CHEVROLET VIN Decoder

Use the box here to look up VINs from CHEVROLET as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • WB11-X-001A - ENGINE AND ENGINE COOLING: The following information is provided to clearly explain isuzua??S policy for control module (engine, transmission, antilock brake, instrument panel, body control, power interface, etc.) reprogramming. Control module calibrations are regula
  • IB10X001E - FUEL SYSTEM, OTHER:FUEL FILTER: This bulletin is being issued to inform dealers of diesel particulate filter (dpf) cleaning recommendations, inspection practices, and recommended r&r procedures for service and cleaning system availability.
  • IB16-J-002 - ENGINE (PWS): Isuzu motors limited has analyzed failed engines and determined that engine oil diluted with diesel fuel is a cause of some engine failures. If the engine oil level is high, the oil may be diluted with diesel fuel. This bulletin is being is
  • IB09-X-001L - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: In order to improve the quality of the original equipment manufacturer (oem) and service replacement engines and transmission assemblies, the isuzu quality center (iqc) is being implemented to assist dealers whenever an isuzu diesel/gasol
  • IB09-X-001K - ENGINE (PWS): In order to improve the quality of the original equipment manufacturer (oem) and service replacement engines and transmission assemblies, the isuzu quality center (iqc) was implemented to assist dealers whenever an isuzu diesel/gasoline eng
  • IB12-J-003C - ENGINE (PWS): Proper installation of the fuel injector pipes into a long block assembly. The fuel injection pipes should be installed onto the new long block assembly after first installing the common rail. When installing the fuel injection pipes, fol

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.