Where is the 2007 DODGE VIPER produced?

The 2007 DODGE VIPER is produced in AUBURN HILLS Mi, United States (usa).

Dodge Viper 2007

Vehicle Details: Service Bulletins

Below you will find all available information on the 2007 DODGE VIPER, manufacturered by Fca Us Llc.

Manufacturer	Known WMI(s)	Fuel Type
DODGE	1C3 4B3

DODGE VIN Decoder

Use the box here to look up VINs from DODGE as well as other manufacturers

Sub-models: - Viper Coupe -

Frequently Asked Questions

Where is the 2007 DODGE VIPER produced?
- The 2007 DODGE VIPER is produced in AUBURN HILLS Mi, United States (usa).

NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

9100226 - ELECTRICAL SYSTEM: Connector kit before ordering this connector repair kit 68018957a$, check it in the mopar connector repair kit website to confirm part number and applicability. There is an error with the wiring diagrams in service library that is causing
9100226 - ELECTRICAL SYSTEM:WIRING: Connector kit before ordering this connector repair kit 68018957a$, check it in the mopar connector repair kit website to confirm part number and applicability. There is an error with the wiring diagrams in service library that is causing
9003215 - ENGINE AND ENGINE COOLING: Part description: 5.7l long block issue description: this 5.7l long block assembly is compatible with both egr and non-egr applications. An egr block-off plate (53032739aa) must be ordered when installing this long block assembly in a
68332810 - ENGINE AND ENGINE COOLING: Service - four piece oil pan gasket all cummins equipped vehicles only - the replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to cummins 5.9l and 6.7l engines only. Installation: 1. C
9003215 - ENGINE AND ENGINE COOLING: Part description: 5.7l long block issue description: this 5.7l long block assembly is compatible with both egr and non-egr applications. An egr block-off plate (53032739aa) must be ordered when installing this long block assembly in a
9002887 - ENGINE AND ENGINE COOLING: Part description: valve body assembly issue description: valve body design was changed between 2010my and 2011my applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ valve bodies with
9004009 - POWER TRAIN: Transmission kit with torque converter 1. All promaster (vf) 3.6l/62te equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (part number 06511385a$) are one-time usag
3100519 - STRUCTURE: Use of aftermarket parts this bulletin involves discussing fca us llc position with regard to collision repair industry awareness regarding the use of aftermarket parts.
3100319 - STRUCTURE: Use of salvage/recycled parts this bulletin involves discussing fca us llc position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
3100619 - STRUCTURE: Repair parts used for structural repairs this bulletin involves discussing fca us llc position with regard to structural repair parts usage.
R2118796A - ENGINE AND ENGINE COOLING: Valve body. These may cause over drive cycling.
23-015-20 - EQUIPMENT: Disinfectant solution recommended for covid-19
08-049-20 - ELECTRICAL SYSTEM: Charging system, battery diagnostic tools and warranty this information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are nece
31-005-19 - EQUIPMENT: Use of aftermarket parts this bulletin involves discussing fca us llc position with regard to collision repair industry awareness regarding the use of aftermarket parts.
31-003-19 - EQUIPMENT: Use of salvage/recycled parts this bulletin involves discussing fca us llc position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
31-006-19 - STRUCTURE: Repair parts used for structural repairs this bulletin involves discussing fca us llc position with regard to structural repair parts usage.
31-001-16 - STRUCTURE: Do not apply corrosion protection on sheet molding compound (smc) plastic panels this bulletin involves discussing smc plastic panels and applying corrosion protection.
9003687 - SEAT BELTS: Restraints remove i-sheet from packaging. Correct information sheet (i-sheet) has been added to star parts. Print i-sheet for technician use.
9002519 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: 82212076, 82203694 - fabric cleaner this "fabric cleaner" is not intended for sale in california, the otc states (connecticut, delaware, massachusetts, maine, new hampshire, new jersey, new york, pennsylvania, virginia, and washington dc
RL108213A$ - ENGINE AND ENGINE COOLING: Nag1 (5a580) valve body as per warranty bulletin d-13-22, please use r2108213a$ valve body for all warranty (w), mopar (m) and mopar vehicle protection (f) claims.~ assembly also includes filter (52108325aa) and gasket (52108332aa).~
23-030-13 - STRUCTURE:BODY: Summary to be provided on a future date.
2200406 - TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS: Tire pressure monitor system information. *kb