Gmc C7 1995

• Recall 15369 [USA]: This can result in loss of sufficient transmission fluid to cause the transmission to stop transmitting power to the rear wheels and could also cause severe transmission damage.
  This is not a safety recall in accordance with federal regulation 573. However, it is deemed a safety improvement campaign by the agency. The transmission oil cooler hose assemby can rupture.
  dealers will replace the suspect transmission oil cooler hoses with parts that meet specifications.
  note: general motors has decided to conduct a safety improvement service campaign to replace the transmission oil cooler hoses without charge. Owners can contact gmc at 1-800-462-8782.

  Show Content

• Recall 17044 [USA]: Consequence of non-compliance: this condition can prevent the backup warning system (lights and audible alarms) from operating properly, increasing the potential for an accident.
  These vehicles were assembled with a transmission reverse signal switch that could leak causing loss of electrical contact when the transmission is in reverse. This does not meet the requirements of fmvss no. 108, "lamps, reflective devices, and associated equipment."
  dealers will replace the reverse signal pressure switch.
  system: lighting and communications; back up lights; audible alarm; fmvss 108.Vehicle description: medium duty conventional trucks and chassis equipped with allison at/mt series automatic transmissions (option rpo's mf1, mt9, me3, me4, me5 and me6). Note: owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time, should contact chevrolet at 1-800-222-1020 or gmc at 1-800-462-8782.Also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

  Show Content

• Recall 16662 [USA]: Cosequence of non-compliance: this condition can cause the seat to collapse during a vehicle accident and would not properly protect the occupant.
  The seats of these vehicles can have incomplete welded left side seat back frame extender arm welds. Vehicles with affected seats do not comply with fmvss no. 207, "seating systems."
  dealers will inspect the left side seat back extender arms of the seats for missing welds. Welds should be on both sides of the seat back extender arm. If a weld is missing, the affected seat back frame assembly(ies) will be replaced.
  system: interior; seats; bucket.Vehicle description: medium duty pickup trucks equipped with national seating company air suspension driver and passenger low and high back bucket seats. Note: if your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided free of charge within a reasonable time, contact chevrolet at 1-800-222-1020 or gmc at 1-810-456-4547. Also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

  Show Content

• Recall 1995182 [Canada]: Suspension
  Insufficient lubrication of the front wheel bearing could result in bearing failure and possible wheel seizure. Correction: vehicles will be inspected and bearings lubricated.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.