1999 GMC Gmt 800Gmc Gmt 800 1999

Vehicle Details: Investigations, Service Bulletins

Below you will find all available information on the 1999 GMC Gmt 800.

ManufacturerKnown WMI(s)Fuel Type
GMC
GMC VIN Decoder

Use the box here to look up VINs from GMC as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • SB-06-02-32-013B - STEERING:HYDRAULIC POWER ASSIST:PUMP: Saab/hummer/gm: diagnostic tips/recommendations when power steering pump replacement is necessary. Analysis of returned power steering (ps) pumps that had been replaced for noise, no power assist, no or low pressure and leaking conditio
  • 201201 - STEERING: Subject regarding steering clunk noise. *tt
Known Recall Investigations
  • Parking brake failure investigation # PE03057

    Odi opened pe03-057 to assess parking brake ineffectiveness in the subject vehicles.These vehicles are equipped with four wheel disc brakes that incorporate a single-shoe drum-in-hat parking brake independent of the service brakes.Complaint and warranty data indicate that the parking brake linings tend to wear out early in the life of the vehicle (at an average of 24 months in service), reducing the parking brake systems torque below that needed to immobilize the vehicle.Gm has attributed this accelerated wear to foreign material intrusion and a failure of the brake shoe to properly self-center within its brake drum.Effective with the start of my 2003 production, a newer reduced force hold-down clip was introduced to facilitate brake shoe disengagement from the drum surface.This part is also available at the service level for the my 1999-2002 vehicles.Gm has indicated that the paking brake is intended to operate in conjunction with the transmission to immobilze parked vehicles, and that in many cases, accelerated parking brake lining wear is caused by rough use, vehicle modifications, and driving with the parking engaged. Odi has upgraded the preliminary evaluation to an engineering analysis to gather further information concerning parking brake usage factors and the circumstances surrounding the seventeen reported vehicle crashes.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.