Harley-davidson Flhtcu 2014

Vehicle Details: Recalls, Consumer Complaints, Service Bulletins

Below you will find all available information on the 2014 HARLEY-DAVIDSON Flhtcu.

ManufacturerKnown WMI(s)Fuel Type
HARLEY-DAVIDSON
HARLEY-DAVIDSON VIN Decoder

Use the box here to look up VINs from HARLEY-DAVIDSON as well as other manufacturers

#

Sub-models: - Flhtcu Tc -

Frequently Asked Questions
  • Are there recalls for the 2014 HARLEY-DAVIDSON Flhtcu?
     - There are 5 recall(s) for the 2014 HARLEY-DAVIDSON Flhtcu, additional information is below.
NHTSA Mandated Recalls
  • Recall 111449 [USA]: If a saddlebag is not adequately secured, it may separate from the motorcycle while riding, creating a road hazard and increasing the risk of a crash.

  • Recall 108544 [USA]: When the engine is running and the motorcycle is in gear, if the clutch cannot be fully disengaged, the motorcycle may move unexpectedly, increasing the risk of a crash.

  • Recall 105594 [USA]: If the clutch does not remain disengaged, the motorcycle may creep forward while the rider intends to be stopped, increasing the risk of a crash.

  • Recall 103747 [USA]: A pinched brake line will increase the front brake fluid pressure, possibly resulting in a front wheel lock-up, increasing the risk of a crash.

  • Recall 100290 [USA]: If the clutch does not disengage, the rider may have difficulty slowing or stopping the motorcycle, increasing the risk of a crash.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • M1612 - UNKNOWN OR OTHER: Service bulletin m1612 (rev a): milwaukee-eight and twin cam transmission gear packs. Purpose: revision. Update: notes for table 3 and 4. * updated: part numbers. This bulletin informs dealers that all: twin cam gear packs on cvo, dyna, po
  • PAB1146 - EXTERIOR LIGHTING: Genuine motor parts and motor accessories bulletin paB1146: 68193-95 bulb wedge, fender tip lamp. Purpose: to inform dealers of an issue with the bulb wire terminals not being to specification. The light bulbs were used in numerous front an
  • M1612 - POWER TRAIN: Service bulletin m1612: milwaukee-eight and twin cam transmission gear packs. Purpose: this bulletin informs dealers that all: ??A?A? Twin cam gear packs on cvo, dyna, police, softail, touring & trike models and ??A?A? Milwaukee-eight gear
  • M1612 - POWER TRAIN: Service bulletin m1612: milwaukee-eight and twin cam transmission gear packs. Purpose: this bulletin informs dealers that all: a?? Twin cam gear packs on cvo, dyna, police, softail, touring & trike models and a?? Milwaukee-eight gear packs
  • TA0016 - STRUCTURE: Technical tip bulletin ta0016: 2014 and later touring steering head bearing adjustment. Purpose: revision. Updated: 2014-2019 to 2014 and later touring vehicles, and vehicles affected. Harley-davidson motorcycles are designed, manufactured
  • TA0006 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Harley-davidson is aware of conditions that may result in a streaking appearance or film residue on the inside of some instrument gauges including speedometer and tachometers. This may occur after exposure of the vehicle to humid condition
  • M1409A - SUSPENSION:FRONT:SPRINGS:AIR SUSPENSION SYSTEM: This bulletin is to inform dealers of the steps to perform after performing the touring and trike rear shock absorber callback return. The shipping plug must be transferred from the new shock to the return shock. When oil is allowed to l
  • TA0006 - ELECTRICAL SYSTEM: Harley-davidson is aware of conditions that may result in a streaking appearance or film residue on the inside of some instrument gauges including speedometer and tachometers. This may occur after exposure of the vehicle to humid condition
  • M1416 - EQUIPMENT: The purpose of this service bulletin is to communicate updates and corrections to certain 2008-2016 service literature.
  • M1409A - SUSPENSION: This bulletin is to inform dealers of the steps to perform after performing the touring and trike rear shock absorber callback return. The shipping plug must be transferred from the new shock to the return shock. When oil is allowed to l
  • M1464 - ELECTRICAL SYSTEM: Service bulletin m1464: boom! Audio - general information and software update 1.22.X. Purpose: revision. This bulletin helps the dealer locate needed information to update and service boom! Box audio infotainment systems. It also lists soft
  • TT413 - SUSPENSION: Technical tip bulletin tt413: 2009 - 2020 touring rear fork rusty water leakage. Purpose: revision. Some 2009 - 2020 touring, touring cvo, touring police models exhibit drainage of rusty water from the rear fork (where the debris deflector
  • PAB1097 - ELECTRICAL SYSTEM: Genuine motor parts and motor accessories bulletin paB1097 international fitment: the boom! Box gts software update. Purpose: to notify international dealers that international gts radios are now available to be ordered and installed in 201
  • PAB1091 - ELECTRICAL SYSTEM: Genuine motor parts and motor accessories bulletin paB1091: 2014-later - boom! Box gts - fitment update. Purpose: revision. To inform dealers of the upcoming software change expanding the boom!A?? Box gts radio fitment from 2019-later to
  • M1476 - ENGINE AND ENGINE COOLING: Service bulletin m1476: 2014 - 2016 twin-cooled coolant pump replacement. Revision: added dealer inventory instructions. Purpose for service bulletin: to inform dealers of a new coolant pump replacement kit for 2014 - 2016 twin cooled vehi
  • 1HDS2L3U02 - POWER TRAIN: Tech article ta0016: 2014 and later touring steering head bearing adjustment. Purpose: during recent dealer visits to observe steering head bearing adjustment process, harley-davidson staff observed that some dealers are not correctly foll
  • 1HDM5V2A05 - POWER TRAIN: Tech article ta0023: ta0023: crankshaft rod bearing. Purpose: technicians have been falsely identifying connecting rod bearings as failed due to a perception of resistance as the rods are rotated. The clearance of the twin cam and milwaukee
  • 1HD-Q4H7G-02 - ELECTRICAL SYSTEM:SOFTWARE: Service bulletin m1430b: boom! Box infotainment system general information and software release 1.20.X description informs the dealer network that boom! Software version 1.20.3 released december 19, 2016 and is now available to download. Th
  • 1HDG3S9W10 - ELECTRICAL SYSTEM:SOFTWARE: Service bulletin m1442: boom! Box infotainment system general information and software release 1.21.X description. This bulletin helps the dealer locate needed information to update and service boom! Box audio infotainment systems. It also
  • 1HDB6S5W11 - STEERING: Tech article tta0016: 2014 and later touring steering head bearing adjustment. Revised. Issue: steering head bearings on 2014 and later touring, cvo touring and police touring motorcycles which may not have been adjusted correctly using the
  • 1HDS3A5B11 - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: Tech tip cruise control and ptt button configuration using digital technician ii. Issue: some cb (citizens band) radio equipped touring model customers have expressed concern about manipulating the ptt (push to talk) button on the right han
  • 1HD-R7V8M-09 - ELECTRICAL SYSTEM: Parts & accessories bulletin paB1067: screamin? Eagle smart tune pro released for shipment. Purpose is to notify dealers that the smart tune pro ? Automatic tuning module is 50-state u.S. Epa approved and released for shipment.
  • 1HD-K8Y7Z-09 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Service bulletin m1446: big twin long block replacement engine, revision. Purpose is updated dealer action for twin cam engines for warranty or as replacement engines. Starting on june 1, 2017 hdmc (harley-davidson motor company) is no lon
  • 1HD-U8G5Q-04 - EQUIPMENT: Service bulletin m-1408f: 2014-2015 touring saddlebag mount - safety recall 0166, reason for revision kit 91500084 that do not meet the inspection criteria described under "required dealer action" no longer need to be returned. Kit 91500084
  • 1HD-F6Q5V-04 - STEERING: STEERING WHEEL/HANDLE BAR: Technical article ta0016: my14-17 touring and cvo touring vehicles with fork mounted fairings; steering head bearings on 2014 and later touring and cvo touring motorcycles which may not have been adjusted correctly using the service manual
  • 1HD-Y6J2F-02 - ELECTRICAL SYSTEM:SOFTWARE: Tech articles: installation of boom! Infotainment software release 1.20.2 may cause the infotainment system to freeze and become non-responsive to inputs from the hand controls, soft keys, or touch screen. An ignition cycle off-on may get t
  • 1HD-K5W9P-01 - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: This bulletin helps the dealer locate needed information to update and service boom! Box audio infotainment systems. It also lists software revisions and the fixes addressed in each revision.
  • 1HD-H2Q8B-12 - EQUIPMENT: This revision corrects and clarifies the information in the previous version.
  • SB-M-1382 - POWER TRAIN:CLUTCH ASSEMBLY: Harley davidson: safety recall code 0159. A tear will develop in primary cup (seal) on master cylinder piston and system loses ability to maintain clutch disengaged and creep forward from stop. Model 2014 fl touring. *pe
  • HD-TT-435 - EQUIPMENT: Harley davidson: information regarding the difference between the access panel on twin cooled models than the access panel on the air cooled models. *pe
Most Recent Consumer Complaints and Accidents
CrashFireTowedInjuredDeathsFailure
Date
NoNoN NoneNone20190617

Tl* the contact owns a 2014 harley-davidson flhtcu. While driving approximately 40 mph uphill, the clutch began to fail and the contact was unable to switch gears. The contact pulled over and parked the vehicle. Afterwards, the clutch began to perform correctly. The contact stated that the failure recurred a second time when attempting to drive uphill again. When the motorcycle was turned off, the clutch performed correctly. The contact took the vehicle to cox's harley-davidson (located at 1178 galleria blvd, rock hill, sc 29730, 803-327-1183), but was not diagnosed or repaired. The contact stated that the previous owner had the vehicle repaired per nhtsa campaign number: 16v471000 (power train); however, the failure persisted. The manufacturer was contacted, but the matter was not resolved. The approximate failure mileage was 34,000. The vin was invalid.

NoNoN NoneNone20190527

My motorcycle in terms of motorcycles although five years old, is relatively new, meticulously kept, and only has approximately 16,600 miles on the odometer.On tuesday may 28th, i had just gotten off the interstate exit that takes me to my home. As i approached the stoplight i was braking and downshifting, bringing the bike to full stop. When the light turned green, i went to put my bike into first from from neutral, and as i did so the back portion of my heel-toe shifter shot up, after which it was loose and floppy and would not engage - as a result, i could not get the bike out of first gear. Thankfully, my house is right off the exit, so i summarily limped home. It turns out that the shifter, which is made of chromium steel, is attached to a splined aluminum shaft- the aluminum shaft striped. After researching this, i found it to be a fairly common issue. I can't tell you how dangerous this is in so many ways and how it needs to be addressed by the manufacturer.

NoNoN NoneNone20150925

Upon getting ready to ride bike at night, pulled back on hand brake lever and noticed no brake light reflection on ground. Therefore did an inspection and noticed that when pressing down on foot brake pedal brake light would come on and then when pulling back on hand brake lever, light would not come on. Called dealer and was told it be a week before they could look at it. . I only wonder since how long has this light not been working when coming to a complete stop and therefore not pressing the foot pedal only to give the car behind me the false sense i have stopped braking. Could have been in a serious accident being hit from behind .

NoNoN NoneNone20150731

After using the usb as a media source, the next time the motorcycle is power cycled the stereo defaults to fm and resets the fade control. Harley initially said this was due to software, but then changed to saying it was normal operation. On november 16th, i spoke with case manager (john), who advised that this is due to the system sensing a voltage change when shutting down. I have replaced the head unit twice; once with a factory refurbished device, and then with a 2015 model. I must note that i did not have this issue for the first 2 years of ownership. Since harley has changed their cause analysis twice, this is obviously a widespread issue. John stated that harley has not isolated the root cause of this problem and is now presenting this the "the way the unit should work". My concern is that i rode for 2 years without any problems, and now have one that the company cannot resolve. Since this occurs approximately 60 - 65% of the time, i worry that this is not really a stereo problem, but is symptomatic of a larger problem within the central electrical/wiring system of the motorcycle. Since august i have worked with 3 separate dealers, and with harley-davidson to address the problem to no avail. I feel that this may become a degrading issue that could create more serious electrical troubles that may lead to major failures.

NoNoN NoneNone20140522

Tl* the contact owns a 2014 harley davidson electra glide flhtcu. The contact stated that after having the vehicle repaired under the nhtsa campaign number: 13v515000 (power train); the clutch failure recurred. The manufacturer was not made aware of the failure. The vehicle was taken to the dealer. The technician diagnosed that the clutch master cylinder needed to be replaced. The vehicle was repaired. The failure and current mileage was 4,884.

NoNoN NoneNone20140510

Purchased the 2014 h-d electraglide ultra classis the day before realizing the existence of the defect described herein. While riding at approximately 60 mph, i set the cruise control. The cruise control is to disengage upon application of any of the following: front brake/back brake/clutch/rolling the throttle forward. Upon nearing a vehicle ahead of me, i 'tapped' the front brake; this action, however did not disengage the cruise control. I tried again, using more force on the front brake lever...Again, the cruise control remained engaged. I then determined that it would disengage using the three other methods (back brake/rolling throttle forward/clutch). The following monday, i took the bike to the selling dealer. It was determined that some electronic component had failed. It was replaced at no cost. I am submitting this report because the failure of the cruise control to disengage upon application of the front brake created a situation in which i was approaching a vehicle ahead at high speed, when my bike should have then been 'coasting', which necessitated trying alternate methods to disengage the system. Had i not found an alternate way to disengage the cruise control, a collision would likely have resulted. *js

Common OBD-II Error Codes

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.