Harley-davidson Fxdb 2007
Vehicle Details: Recalls, Consumer Complaints, Decoded VIN Details, Service Bulletins
Below you will find all available information on the 2007 HARLEY-DAVIDSON Fxdb.
The vehicle is described as a Two Wheel Motorcycle (excluding motor scooters).
Manufacturer | Known WMI(s) | Fuel Type |
---|---|---|
HARLEY-DAVIDSON | Gasoline |
Use the box here to look up VINs from HARLEY-DAVIDSON as well as other manufacturers
Sub-models: - Fxdb / Dyna Street Bob -
-
Where is the 2007 HARLEY-DAVIDSON Fxdb produced?
- The 2007 HARLEY-DAVIDSON Fxdb is produced in Kansas City Missouri, United States (usa).
-
Are there recalls for the 2007 HARLEY-DAVIDSON Fxdb?
- There are 1 recall(s) for the 2007 HARLEY-DAVIDSON Fxdb, additional information is below.
-
What is the GVWR of a 2007 HARLEY-DAVIDSON Fxdb?
- The 2007 HARLEY-DAVIDSON Fxdb has a GVWR of Class 1A: 3,000 lb or less (1,360 kg or less) lbs.
-
How much horsepower does the 2007 HARLEY-DAVIDSON Fxdb have?
- The 2007 HARLEY-DAVIDSON Fxdb has 67 horsepower.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- M1612 - ENGINE AND ENGINE COOLING: Service bulletin m1612 (rev a): milwaukee-eight and twin cam transmission gear packs. Purpose: revision. Update: notes for table 3 and 4. * updated: part numbers. This bulletin informs dealers that all: twin cam gear packs on cvo, dyna, po
- M1612 - POWER TRAIN: Service bulletin m1612: milwaukee-eight and twin cam transmission gear packs. Purpose: this bulletin informs dealers that all: ??A?A? Twin cam gear packs on cvo, dyna, police, softail, touring & trike models and ??A?A? Milwaukee-eight gear
- M1612 - POWER TRAIN: Service bulletin m1612: milwaukee-eight and twin cam transmission gear packs. Purpose: this bulletin informs dealers that all: a?? Twin cam gear packs on cvo, dyna, police, softail, touring & trike models and a?? Milwaukee-eight gear packs
- TT451 - ENGINE (PWS): Noise from the cam chest area possibly accompanied by milky engine oil. Moisture can cause slight swelling in the tensioner causing it to stick in the housing. A vehicle that makes repeated short trips can have this condition because the en
- TT451 - ENGINE (PWS): Noise from the cam chest area possibly accompanied by milky engine oil. Moisture can cause slight swelling in the tensioner causing it to stick in the housing. A vehicle that makes repeated short trips can have this condition because the en
- M1493 - FUEL SYSTEM, GASOLINE: Service bulletin m1493: fuel caps and cup change. Revision. Purpose: this bulletin informs dealers that harley-davidson is making a fuel tank running change on side fill touring, police touring, touring cvo, trike and all softail and sport
- 1HDM5V2A05 - POWER TRAIN: Tech article ta0023: ta0023: crankshaft rod bearing. Purpose: technicians have been falsely identifying connecting rod bearings as failed due to a perception of resistance as the rods are rotated. The clearance of the twin cam and milwaukee
- SB-M-1220 - ENGINE AND ENGINE COOLING:ENGINE: Harley davidson: engine idle temperature management system. The calibration offers limited rear cylinder cooling with the motorcycle stopped while the engine is left at idle once the temperature threshold is exceeded. Models 2007-08 dyna a
138 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.
Variable | Value |
---|---|
Body Class | Motorcycle - Custom |
DisplacementCC | 1584 |
DisplacementCI | 96.661610646 |
DisplacementL | 1.584000 |
Engine Cycles | 4 |
Engine Cylinders | 2 |
EngineHP | 67 |
EngineKW | 49.9619 |
Error Text | 0 - VIN decoded clean. Check Digit (9th position) is correct |
Fuel Type Primary | Gasoline |
GVWR | Class 1A: 3,000 lb or less (1,360 kg or less) |
Make | HARLEY DAVIDSON |
MakeID | 3888 |
Manufacturer | HARLEY-DAVIDSON MOTOR COMPANY |
Manufacturer Id | 4249 |
Model | FXDB / Dyna Street Bob |
ModelID | 11053 |
Model Year | 2007 |
NCSA Body Type | Two Wheel Motorcycle (excluding motor scooters) |
NCSA Make | Harley-Davidson |
NCSA Model | 750cc or greater |
Note | REGULAR INTRODUCTION DATE |
Other Motorcycle Info | Heavyweight Motorcycle: 901cm3 or larger |
Plant City | KANSAS CITY |
Plant Country | UNITED STATES (USA) |
Plant State | MISSOURI |
VIN | 1HD1GX4137K321992 |
Vehicle Type | MOTORCYCLE |
Crash | Fire | Towed | Injured | Deaths | Failure Date |
---|
No | No | N | None | None | 20110225 |
Rear wheel locked up when accelerating from stop at traffic light. Motorcycle stalled and i could not get it to move forward. Thought brake was stuck, but after visual inspection noticed all the bolts (5) in the rear sprocket had sheared off. It does not appear that the bolts backed out of the wheel hub, because part of the bolts remained in the bottom of the threaded portion of the hub. After removing the wheel and inspecting the damage it appears that the stainless bolts, aluminum hub and loose fitting holes in the sprocket all played a role in the failure. Note: to the best of my knowledge all parts are stock parts and as installed by the factory. An internet search revealed numerous forums on harley motorcycles with owners complaining about this failure. I read forum post from 2003 to february 2011 discussing the sheared sprocket bolts, and refusal from harley to address this issue. I believe this is a very serious safety problem that demands the attention from nhtsa to protect the safety of the public. I work in the power industry and have witnessed root cause failures due to corrosion of dissimilar metals - aluminum and steel, stress crack corrosion caused by high moisture, and stress risers caused at threads from loose fitting parts flexing when torque. All of these conditions exists in the design and installation of the sprocket at the rear wheel installed on this motorcycle. I have the parts available for inspection and analysis if requested by nhtsa and or harley davidson company. *tr
No | No | N | None | None | 20090801 |
While riding my 2007 harley davidson fxdbi, the left side upper shock mount bolt sheared. This nearly caused me to lose control of the motorcycle. *tr
No | No | N | None | None | 20070619 |
Tl*the contact owns a 2007 harley davidson fxdb. While driving 20-70 mph, the vehicle jerked slightly, vibrated when turning, and made a popping sound. The failures also occurred when the front brakes were applied. The dealer changed the bearings in the steering column, but the failure recurred. The current mileage was 4,127 and failure mileage was 300.
VIN | Year | Model | Manufactured In |
---|---|---|---|
1HD1GX4167K317158 | 2007 | FXDB / Dyna Street Bob | KANSAS CITY MISSOURI, UNITED STATES (USA) |
1HD1GX4137K321992 | 2007 | FXDB / Dyna Street Bob | KANSAS CITY MISSOURI, UNITED STATES (USA) |
5HD1GX4197K329183 | 2007 | FXDB / Dyna Street Bob | KANSAS CITY MISSOURI, UNITED STATES (USA) |
5HD1GX4127K332569 | 2007 | FXDB / Dyna Street Bob | KANSAS CITY MISSOURI, UNITED STATES (USA) |
5HD1GX4117K335348 | 2007 | FXDB / Dyna Street Bob | KANSAS CITY MISSOURI, UNITED STATES (USA) |
1HD1GX4107K323845 | 2007 | FXDB / Dyna Street Bob | KANSAS CITY MISSOURI, UNITED STATES (USA) |
1HD1GX4117K304530 | 2007 | FXDB / Dyna Street Bob | KANSAS CITY MISSOURI, UNITED STATES (USA) |
1HD1GX4107K327085 | 2007 | FXDB / Dyna Street Bob | KANSAS CITY MISSOURI, UNITED STATES (USA) |
1HD1GX4127K334975 | 2007 | FXDB / Dyna Street Bob | KANSAS CITY MISSOURI, UNITED STATES (USA) |
1HD1GX4187K322006 | 2007 | FXDB / Dyna Street Bob | KANSAS CITY MISSOURI, UNITED STATES (USA) |
1HD1GX4197K311175 | 2007 | FXDB / Dyna Street Bob | KANSAS CITY MISSOURI, UNITED STATES (USA) |
1HD1GX4397K309850 | 2007 | FXDB / Dyna Street Bob | KANSAS CITY MISSOURI, UNITED STATES (USA) |
1HD1GX4187K320496 | 2007 | FXDB / Dyna Street Bob | KANSAS CITY MISSOURI, UNITED STATES (USA) |