Harley-davidson Fxstsse 2007

Vehicle Details: Recalls, Consumer Complaints, Service Bulletins

Below you will find all available information on the 2007 HARLEY-DAVIDSON Fxstsse.

ManufacturerKnown WMI(s)Fuel Type
HARLEY-DAVIDSON
HARLEY-DAVIDSON VIN Decoder

Use the box here to look up VINs from HARLEY-DAVIDSON as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 2007 HARLEY-DAVIDSON Fxstsse?
     - There are 1 recall(s) for the 2007 HARLEY-DAVIDSON Fxstsse, additional information is below.
NHTSA Mandated Recalls
  • Recall 32837 [USA]: This could lead to an oil leak and/or possible fire, which could result in injury or death to the rider.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • M1612 - UNKNOWN OR OTHER: Service bulletin m1612 (rev a): milwaukee-eight and twin cam transmission gear packs. Purpose: revision. Update: notes for table 3 and 4. * updated: part numbers. This bulletin informs dealers that all: twin cam gear packs on cvo, dyna, po
  • M1612 - UNKNOWN OR OTHER: Service bulletin m1612: milwaukee-eight and twin cam transmission gear packs. Purpose: this bulletin informs dealers that all: ??A?A? Twin cam gear packs on cvo, dyna, police, softail, touring & trike models and ??A?A? Milwaukee-eight gear
  • M1612 - VEHICLE SPEED CONTROL: Service bulletin m1612: milwaukee-eight and twin cam transmission gear packs. Purpose: this bulletin informs dealers that all: a?? Twin cam gear packs on cvo, dyna, police, softail, touring & trike models and a?? Milwaukee-eight gear packs
  • TT451 - ENGINE (PWS): Noise from the cam chest area possibly accompanied by milky engine oil. Moisture can cause slight swelling in the tensioner causing it to stick in the housing. A vehicle that makes repeated short trips can have this condition because the en
  • TT451 - ENGINE (PWS): Noise from the cam chest area possibly accompanied by milky engine oil. Moisture can cause slight swelling in the tensioner causing it to stick in the housing. A vehicle that makes repeated short trips can have this condition because the en
  • M1330 - EQUIPMENT: Service bulletin m1330: 2006-2009 6-speed transmission replacement parts. Purpose: revision. This bulletin is to inform dealers that replacement 6-speed cruise drive??A?A? Transmissions and gear packs having a spur 5th gear will be replaced
  • SB-M-1220 - ENGINE AND ENGINE COOLING:ENGINE: Harley davidson: engine idle temperature management system. The calibration offers limited rear cylinder cooling with the motorcycle stopped while the engine is left at idle once the temperature threshold is exceeded. Models 2007-08 dyna a
  • M-1186 - ENGINE AND ENGINE COOLING:ENGINE: Harley-davidson motorcycle: refinement to the ecm calibration for 2007 big twin model will smooth the torque curve application in a manner that minimizes high shock loads to drive train components, which could cause engine damage. *p
Most Recent Consumer Complaints and Accidents
CrashFireTowedInjuredDeathsFailure
Date
NoNoN NoneNone20200728

Tl* the contact owns a 2007 harley-davidson fxstsse. The contact stated that while driving at various speeds, the pressure switch for the braking system failed causing a brake fluid leak. The motorcycle was not taken to be diagnosed nor repaired. Roundhouse harley-davidson 495 municipal dr, duncansville, pa 16635, was contacted and informed of the failure. The contact was informed that the motorcycle was not subjected to a recall. The contact referenced nhtsa campaign number: 07v173000 (electrical system) as a possible solution to the failure however, the vin was not included. The manufacturer was made aware of the failure. The failure mileage was approximately 71,000. The vin was not available. Warranty on a h-0 was 2 yrs.

NoNoN NoneNone20200727

Tl* the contact owns a 2007 harley-davidson fxstsse. The contact stated that while driving at various speeds, the pressure switch for the braking system failed causing a brake fluid leak. The motorcycle was not taken to be diagnosed nor repaired. Roundhouse harley-davidson 495 municipal dr, duncansville, pa 16635, was contacted and informed of the failure. The contact was informed that the motorcycle was not subjected to a recall. The contact referenced nhtsa campaign number: 07v173000 (electrical system) as a possible solution to the failure however, the vin was not included. The manufacturer was made aware of the failure. The failure mileage was approximately 71,000. The vin was not available.

NoNoN NoneNone20100620

Tl* the contact owns a 2007 harley davidson fxstsse motorcycle. The contact was driving 60 mph when the engine stalled without warning. The contact was able to restart the vehicle yet the failure recurred three times. The vehicle was taken to the dealer where it was kept for two days yet the dealer was unable to duplicate the failure. The manufacturer advised the dealer that the 2007 models had experienced problems with the ignition control switches. The dealership advised the contact that they would replace the ignition switch at the expense of the manufacturer. The vehicle was repaired. The failure mileage was 7,000.

NoNoN NoneNone20071108

My 2007 harley-davidson 110 cu in motor has a warped rear cylinder head, only 8,400 miles. *tr

NoNoN NoneNone20070920

1. Overheating 2. On going oil leak 3. Noisy engine engine overheats, since purchase the engine has had an ongoing oil leak in the rear cylinder, gaskets have been replaced, rear cyclinder replaced and engine dye tested. To this date problem is still ongoing. Engine has over abundance of noise, constant clicking. *tr

NoNoN NoneNone20070525

Excessive heat from motor making the motorcycle uncomfortable to ride oil temps reaching 260 degrees in oil tank that is under the seat resulting in legs and lower extremity discomfort. Dealer has returned the bike two times and installed a harley davidson sert and new exhaust and the heat is still present. I am concerned the excessive heat may cause the motor to lock up ,therefore resulting in injury or death. *tr

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.