Use the box here to look up VINs from HONDA as well as other manufacturers
NHTSA Mandated Recalls
Recall R/2019/243 [UK]: Possible air bag inflator rupture
Passenger air bag may not deploy correctly. the inflator inside the passenger?S airbag module is to be replaced.
Recall R/2010/007 [UK]: Risk of fire
Water and other liquids may enter the driver's side power window switch and may cause damage switch failure overheating and potentially a fire. recall affected vehicles check switch and wiring if damaged replace and then fit external cover to switch to prevent water ingress.
Recall R/2010/228 [UK]: Headlights may not illuminate correctly
Due to the layout of the lighting switch wiring harness the low beam headlight circuit can be pulled tighter than other wires. After repeated use of the headlight switch the low beam terminal can become worn and poor electrical continuity may result from an accumulation of copper oxide. In some cases the poor continuity the poor continuity or melted terminal ends will cause the wiring harness terminal ends to melt. Poor continuity or melted terminal ends will cause the low beam head lights to become inoperative increasing the risk of accident. the dealer will inspect the low beam terminal if the terminal shows signs of melting the lighting switch and low beam terminal harness will be replaced. If the terminal is not melted the low beam terminal harness will be replaced.
Recall R/2013/076 [UK]: Risk of fire
Water and other liquids may enter the driver's side power window switch and may cause damage switch failure overheating and potentially a fire. recall affected vehicles and replace driver's side power window switch.
Recall R/2013/049 [UK]: Passenger side airbag may fail to deploy correctly
The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant or in a thermal issue in the interior compartment which may lead to fire. recall the vehicles that are likely to be affected to inspect and where necessary replace the airbag inflator module.
Recall R/2014/158 [UK]: Drivers airbag may rupture if deployed
The drivers front airbag inflator could produce excessive internal pressure. If an affected airbag deploys the increased internal pressure may cause the inflator to rupture. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment potentially causing injury to a vehicle occupant. recall the vehicles that are likely to be affected and replace the inflator inside the drivers airbag module with a new one.
Recall R/2015/104 [UK]: Passenger side airbag may fail to deploy correctly
Abnormal deployment pressure may lead to rupture of the inflator case. In the event of an inflator rupture metal fragments could be propelled upward toward the windshield or downward toward the front passenger?S foot well potentially causing injury to a vehicle occupant. on affected vehicles replace the inflator inside the front passenger?S airbag module with a new one.
Recall R/2019/245 [UK]: Possible air bag inflator rupture
Driver air bag may not deploy correctly. the inflator inside the drivers airbag module is to be replaced.
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.