Use the box here to look up VINs from HONDA as well as other manufacturers
NHTSA Mandated Recalls
Recall R/2019/243 [UK]: Possible air bag inflator rupture
Passenger air bag may not deploy correctly. the inflator inside the passenger?S airbag module is to be replaced.
Recall R/2010/007 [UK]: Risk of fire
Water and other liquids may enter the driver's side power window switch and may cause damage switch failure overheating and potentially a fire. recall affected vehicles check switch and wiring if damaged replace and then fit external cover to switch to prevent water ingress.
Recall R/2010/228 [UK]: Headlights may not illuminate correctly
Due to the layout of the lighting switch wiring harness the low beam headlight circuit can be pulled tighter than other wires. After repeated use of the headlight switch the low beam terminal can become worn and poor electrical continuity may result from an accumulation of copper oxide. In some cases the poor continuity the poor continuity or melted terminal ends will cause the wiring harness terminal ends to melt. Poor continuity or melted terminal ends will cause the low beam head lights to become inoperative increasing the risk of accident. the dealer will inspect the low beam terminal if the terminal shows signs of melting the lighting switch and low beam terminal harness will be replaced. If the terminal is not melted the low beam terminal harness will be replaced.
Recall R/2013/076 [UK]: Risk of fire
Water and other liquids may enter the driver's side power window switch and may cause damage switch failure overheating and potentially a fire. recall affected vehicles and replace driver's side power window switch.
Recall R/2015/104 [UK]: Passenger side airbag may fail to deploy correctly
Abnormal deployment pressure may lead to rupture of the inflator case. In the event of an inflator rupture metal fragments could be propelled upward toward the windshield or downward toward the front passenger?S foot well potentially causing injury to a vehicle occupant. on affected vehicles replace the inflator inside the front passenger?S airbag module with a new one.
Recall R/2019/245 [UK]: Possible air bag inflator rupture
Driver air bag may not deploy correctly. the inflator inside the drivers airbag module is to be replaced.
Recall R/2008/161 [UK]: Handbrake could become inoperative.
It has been identified that the handbrake lever ratchet may not latch into position when the handbrake is applied due to the possibility of the internal push rod possibly having suffered damage during assembly. With continued usage the push rod joint can become worn causing the handbrake ratchet mechanism not to latch sufficiently. Should this occur the handbrake will become inoperative. recalled vehicles will have the handbrake mechanism replaced.
Recall R/2016/045 [UK]: Drivers airbag inflator may rupture if deployed
Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment. on affected vehicles replace the inflator inside the driver's air bag module.
Recall R/2007/061 [UK]: Engine may cut out
The fuel pump relay may fail which will result in either the engine not starting or stalling. recall the vehicles that are likely to be affected to check and where necessary place the fuel pump relay.
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.